HomeAboutCareersProductsProjectsStandardsContact Us
 
 

PRODUCTS - CONCRETE PIPE

  
  

Overview:

Geneva Pipe Company is one of the most respected concrete product producers in the western United States. With production from four facilities, Geneva Pipe is able produce a large variety of concrete products. Our strong production flexibility coupled with quality engineering, allows Geneva Pipe to easily meet the normal everyday needs and requirements of specifiers. With a full line of standard products, Geneva Pipe meets not only your routine needs but your specialty applications as well. We welcome the opportunity to accomplish the unique and the unusual specification. The Geneva Pipe product is designed and manufactured for strength, durability, extended service life, and ease of installation. The product line covers from 12 inches to 144 inches in diameter with most of the variations and variety required by products of this size and scope. Please contact your Geneva Pipe Representative for any technical assistance.

 

Circular Reinforced Concrete Pipe with Rubber Gasket:
ASTM C-76, ASTM 655, AASHTO M170, AASHTO M242


Nominal Pipe ID
Bell OD
Wall Thickness
Joint Length
Joint Weight
Square Feet Area
12 in
20.00 in
2.25 in
8 Ft
960 Lbs
0.79 Sq Ft
15 in
23.88 in
2.25 in
8 Ft
1080 Lbs
1.23 Sq Ft
18 in
27.63 in
2.50 in
8 Ft
1552 Lbs
1.77 Sq Ft
21 in
31.75 in
3.00 in
8 Ft
1920 Lbs
2.41 Sq Ft
24 in
35.63 in
3.00 in
8 Ft
2336 Lbs
3.14 Sq Ft
27 in
38.00 in
4.00 in
8 Ft
2842 Lbs
3.98 Sq Ft
30 in
41.34 in
3.90 in
8 Ft
4160 Lbs
4.91 Sq Ft
36 in
51.19 in
4.65 in
8 Ft
5040 Lbs
7.07 Sq Ft
42 in
55.12 in
4.77 in*
8/12 Ft
810 Lbs/Lf
9.62 Sq Ft
48 in
63.00 in
5.33 in*
8/12 Ft
989 Lbs/Lf
12.57 Sq Ft
54 in
70.00 in
5.50 in
8/12 Ft
1117 Lbs/Lf
15.90 Sq Ft
60 in
76.55 in
6.00 in
8/12 Ft
1532 Lbs/Lf
19.64 Sq Ft
66 in
84.00 in
7.25 in
12 Ft
21600 Lbs
23.76 Sq Ft
72 in
88.00 in
7.00 in
8/12 Ft
1842 Lbs/Lf
28.27 Sq Ft
84 in
101.50 in
8.75 in
8/12 Ft
2650 Lbs/Lf
38.49 Sq Ft
96 in
115.50 in
9.75 in
8/12 Ft
3375 Lbs/Lf
50.27 Sq Ft

Note: Please contact your Geneva Pipe Representative for any pipe diameter not noted on the above graph. All pipes manufactured by Geneva Pipe will adhere to ASTM or AASHTO requirements in regards to reinforcement and concrete compressive strengths. Pipe dimensions are subject to allowable tolerances and parameters of ASTM and AASHTO Specifications.

* Bell and wall dimensions differ on 12' lengths - See drawings.

Standard Specifications for Reinforced Concrete Pipe:

ASTM C76 – (most current)
• “Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe”

ASTM C76M – (most current)
• “Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe” (Metric)

ASTM C655 – (most current)
• “Reinforced Concrete D-Load Culvert, Storm Drain and Sewer Pipe”

ASTM C655M – (most current)
• “Reinforced Concrete D-load Culvert, Storm Drain and Sewer Pipe” (Metric)

AASHTO M170 (most current)
• “Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe”

AASHTO M170M (most current)
• “Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)”

AASHTO M242 (most current)
• “Reinforced Concrete D-load Culvert, Storm Drain, and Sewer Pipe”

AASHTO M242M (most current)
• “Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)”

Applications:
• Storm Drains
• Sanitary Sewers
• Culverts
• Underground Stormwater Detention Systems
• Irrigation Systems
• Treatment plants

Design:

The project engineer should determine all concrete pipe strength classifications (Classes I, II, III, IV, & V) and installation criteria. In an effort to aid the design engineer in both the direct and indirect design methods see the Education area available on the home page of the Geneva Pipe website/catalog. For any additional information contact your Geneva Pipe Representative.

Click here to view additional pipe drawings.

Click here to review Type 3 fill height charts, standard trench/embankment installations and soil requirements.

Click here to review Pipe Lifting Devices.

For any additional information contact your local Geneva Pipe Representative:

Email: info@genevapipe.com
Phone: 888-225-2416

Back to Top


Circular Non-Reinforced Concrete Pipe with Rubber Gaskets
ASTM C-14, AASHTO M86

Nominal Pipe ID
Bell OD
Wall Thickness
Joint Length
Joint Weight
Square Feet Area
12 in
20.00 in
2.25 in
8 Ft
960 Lbs
0.79 Sq Ft
15 in
23.88 in
2.25 in
8 Ft
1080 Lbs
1.23 Sq Ft
18 in
27.63 in
2.50 in
8 Ft
1552 Lbs
1.77 Sq Ft
21 in
27.63 in
3.00 in
8 Ft
1920 Lbs
2.41 Sq Ft
24 in
35.61 in
3.00 in
8 Ft
2336 Lbs
3.14 Sq Ft
27 in
38.00 in
4.00 in
8 Ft
2842 Lbs
3.98 Sq Ft
30 in
41.31 in
4.13 in
8 Ft
4160 Lbs
4.91 Sq Ft
36 in
51.19 in
4.94 in
8 Ft
5040 Lbs
7.07 Sq Ft

Note: All non-reinforced concrete pipe manufactured by Geneva Pipe will adhere to the requirements of ASTM and AASHTO specifications. All dimensions are subject to allowable tolerances and parameters of those specifications.

Standard Specifications for Non-Reinforced Concrete Pipe:

ASTM C-14 (most current)
• “Concrete Culvert, Storm Drain, and Sewer Pipe”

ASTM C-14M (most current)
• “Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)”

AASHTO M86 (most current)
• “Concrete Culvert, Storm Drain, and Sewer Pipe”

AASHTO M86M (most current)
• “ Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)”

Applications:

• Storm Drains
• Culverts
• Irrigation Systems

Design:

The project engineer should determine all concrete pipe strength classifications (Classes 1, 2, & 3) and installation criteria. In an effort to aid the design engineer in both the direct and indirect design methods see the Software / Education area available on the home page of the Geneva Pipe website/catalog or contact your Geneva Pipe Representative.

Click here to view additional pipe drawings.

Click here to review Pipe Lifting Devices.

For any additional information contact your local Geneva Pipe Representative:

Email: info@genevapipe.com
Phone: 888-225-2416

Back to Top

Elliptical Concrete Pipe with Joint Sealant:
ASTM C-507, AASHTO M207

Nominal Pipe Size
Circular Equivalent
Joint Weight
Wall Thickness
Joint Length
Square Feet Area
14" x 23"
18 in
1665 Lbs
3.00 in
8.0 Ft
1.8 Sq Ft
19" x 30"
24 in
2560 Lbs
3.50 in
8.0 Ft
3.3 Sq Ft
24" x 38"
30 in
3670 Lbs
3.75 in
8.0 Ft
5.1 Sq Ft
29" x 45"
36 in
5000 Lbs
4.50 in
7.5 Ft
7.4 Sq Ft
34" x 53"
42 in
6520 Lbs
5.00 in
7.5 Ft
10. 2 Sq Ft
38" x 60"
48 in
8335 Lbs
5. 75 in
8.00 Ft
12.9 Sq Ft

Note: For elliptical pipe sizes larger than noted on graph please contact your Geneva Pipe Representative. Area of reinforcement, number of cages, and concrete compressive strengths shall be in conformance with appropriate ASTM / AASHTO specifications for Class HE-A, HE-I, HE-II, HE-III, or HE-IV as required. All dimensions are subject to allowable tolerances and parameters of those specifications.

Standard Specifications for Elliptical Concrete Pipe:

ASTM C-507 (most current)
• “Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe”

ASTM C-507M (most current)
• “Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)”

AASHTO M207 (most current)
• “Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe”

AASHTO M207M (most current)
• “Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)”

Applications:

• Storm Drains
• Underground Detention Systems
• Culverts
• Sanitary Sewers

Design:

The project engineer should determine all concrete pipe strength classifications (Classes HE-I, HE-II, HE-III, & HE-IV) and installation criteria. In an effort to aid the design engineer in both the direct and indirect design methods see the Software / Education area available on the home page of the Geneva Pipe website/catalog. For any additional information contact your Geneva Pipe Representative.

Click here to view additional pipe drawings.

Click here to review Pipe Lifting Devices.

Jacking / Microtunneling Pipe

Uses:

• Storm Drains
• Sanitary Sewers
• Culverts

Specifications:

All specifications are project specific. Please contact Geneva Pipe to assure that all pipes are manufactured to meet the appropriate project specifications. This pipe can be designed for both sanitary and storm applications. Please review specific diameters and the Geneva Pipe Jacking Guidelines located on our Pipe Drawing Page. For any specific diameter not shown on the Pipe Drawing Page, please call your Geneva Pipe Representative.


Click here to view Jacked Pipe drawings and guidelines.

Click here to review Pipe Lifting Devices.

For any additional information contact your local Geneva Pipe Representative:

Email: info@genevapipe.com
Phone: 888-225-2416

Back to Top

 
 
 
 

Home | About | Products | Projects | Education | Contact Us

Copyright © 2009 Geneva Pipe, Inc.
1-888-225-2416 | info@genevapipe.com
A Member of the American Concrete Pipe Association and the Mountain States Concrete Pipe Association